# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""Module for file-like access of blobs, usually invoked via Blob.open()."""

import io
import warnings

from google.api_core.exceptions import RequestRangeNotSatisfiable
from google.cloud.storage._helpers import _NUM_RETRIES_MESSAGE
from google.cloud.storage.retry import DEFAULT_RETRY
from google.cloud.storage.retry import DEFAULT_RETRY_IF_GENERATION_SPECIFIED
from google.cloud.storage.retry import ConditionalRetryPolicy


# Resumable uploads require a chunk size of precisely a multiple of 256 KiB.
CHUNK_SIZE_MULTIPLE = 256 * 1024  # 256 KiB
DEFAULT_CHUNK_SIZE = 40 * 1024 * 1024  # 40 MiB

# Valid keyword arguments for download methods, and blob.reload() if needed.
# Note: Changes here need to be reflected in the blob.open() docstring.
VALID_DOWNLOAD_KWARGS = {
    "if_generation_match",
    "if_generation_not_match",
    "if_metageneration_match",
    "if_metageneration_not_match",
    "timeout",
    "retry",
    "raw_download",
}

# Valid keyword arguments for upload methods.
# Note: Changes here need to be reflected in the blob.open() docstring.
VALID_UPLOAD_KWARGS = {
    "content_type",
    "predefined_acl",
    "num_retries",
    "if_generation_match",
    "if_generation_not_match",
    "if_metageneration_match",
    "if_metageneration_not_match",
    "timeout",
    "checksum",
    "retry",
}


class BlobReader(io.BufferedIOBase):
    """A file-like object that reads from a blob.

    :type blob: 'google.cloud.storage.blob.Blob'
    :param blob:
        The blob to download.

    :type chunk_size: long
    :param chunk_size:
        (Optional) The minimum number of bytes to read at a time. If fewer
        bytes than the chunk_size are requested, the remainder is buffered.
        The default is the chunk_size of the blob, or 40MiB.

    :type retry: google.api_core.retry.Retry or google.cloud.storage.retry.ConditionalRetryPolicy
    :param retry:
        (Optional) How to retry the RPC. A None value will disable
        retries. A google.api_core.retry.Retry value will enable retries,
        and the object will define retriable response codes and errors and
        configure backoff and timeout options.

        A google.cloud.storage.retry.ConditionalRetryPolicy value wraps a
        Retry object and activates it only if certain conditions are met.
        This class exists to provide safe defaults for RPC calls that are
        not technically safe to retry normally (due to potential data
        duplication or other side-effects) but become safe to retry if a
        condition such as if_metageneration_match is set.

        See the retry.py source code and docstrings in this package
        (google.cloud.storage.retry) for information on retry types and how
        to configure them.

        Media operations (downloads and uploads) do not support non-default
        predicates in a Retry object. The default will always be used. Other
        configuration changes for Retry objects such as delays and deadlines
        are respected.

    :param download_kwargs:
        Keyword arguments to pass to the underlying API calls.
        The following arguments are supported:

        - ``if_generation_match``
        - ``if_generation_not_match``
        - ``if_metageneration_match``
        - ``if_metageneration_not_match``
        - ``timeout``

        Note that download_kwargs are also applied to blob.reload(), if a reload
        is needed during seek().
    """

    def __init__(self, blob, chunk_size=None, retry=DEFAULT_RETRY, **download_kwargs):
        for kwarg in download_kwargs:
            if kwarg not in VALID_DOWNLOAD_KWARGS:
                raise ValueError(
                    f"BlobReader does not support keyword argument {kwarg}."
                )

        self._blob = blob
        self._pos = 0
        self._buffer = io.BytesIO()
        self._chunk_size = chunk_size or blob.chunk_size or DEFAULT_CHUNK_SIZE
        self._retry = retry
        self._download_kwargs = download_kwargs

    def read(self, size=-1):
        self._checkClosed()  # Raises ValueError if closed.

        result = self._buffer.read(size)
        # If the read request demands more bytes than are buffered, fetch more.
        remaining_size = size - len(result)
        if remaining_size > 0 or size < 0:
            self._pos += self._buffer.tell()
            read_size = len(result)

            self._buffer.seek(0)
            self._buffer.truncate(0)  # Clear the buffer to make way for new data.
            fetch_start = self._pos
            if size > 0:
                # Fetch the larger of self._chunk_size or the remaining_size.
                fetch_end = fetch_start + max(remaining_size, self._chunk_size)
            else:
                fetch_end = None

            # Download the blob. Checksumming must be disabled as we are using
            # chunked downloads, and the server only knows the checksum of the
            # entire file.
            try:
                result += self._blob.download_as_bytes(
                    start=fetch_start,
                    end=fetch_end,
                    checksum=None,
                    retry=self._retry,
                    **self._download_kwargs,
                )
            except RequestRangeNotSatisfiable:
                # We've reached the end of the file. Python file objects should
                # return an empty response in this case, not raise an error.
                pass

            # If more bytes were read than is immediately needed, buffer the
            # remainder and then trim the result.
            if size > 0 and len(result) > size:
                self._buffer.write(result[size:])
                self._buffer.seek(0)
                result = result[:size]
            # Increment relative offset by true amount read.
            self._pos += len(result) - read_size
        return result

    def read1(self, size=-1):
        return self.read(size)

    def seek(self, pos, whence=0):
        """Seek within the blob.

        This implementation of seek() uses knowledge of the blob size to
        validate that the reported position does not exceed the blob last byte.
        If the blob size is not already known it will call blob.reload().
        """
        self._checkClosed()  # Raises ValueError if closed.

        if self._blob.size is None:
            self._blob.reload(**self._download_kwargs)

        initial_offset = self._pos + self._buffer.tell()

        if whence == 0:
            target_pos = pos
        elif whence == 1:
            target_pos = initial_offset + pos
        elif whence == 2:
            target_pos = self._blob.size + pos
        if whence not in {0, 1, 2}:
            raise ValueError("invalid whence value")

        if target_pos > self._blob.size:
            target_pos = self._blob.size

        # Seek or invalidate buffer as needed.
        if target_pos < self._pos:
            # Target position < relative offset <= true offset.
            # As data is not in buffer, invalidate buffer.
            self._buffer.seek(0)
            self._buffer.truncate(0)
            new_pos = target_pos
            self._pos = target_pos
        else:
            # relative offset <= target position <= size of file.
            difference = target_pos - initial_offset
            new_pos = self._pos + self._buffer.seek(difference, 1)
        return new_pos

    def close(self):
        self._buffer.close()

    @property
    def closed(self):
        return self._buffer.closed

    def readable(self):
        return True

    def writable(self):
        return False

    def seekable(self):
        return True


class BlobWriter(io.BufferedIOBase):
    """A file-like object that writes to a blob.

    :type blob: 'google.cloud.storage.blob.Blob'
    :param blob:
        The blob to which to write.

    :type chunk_size: long
    :param chunk_size:
        (Optional) The maximum number of bytes to buffer before sending data
        to the server, and the size of each request when data is sent.
        Writes are implemented as a "resumable upload", so chunk_size for
        writes must be exactly a multiple of 256KiB as with other resumable
        uploads. The default is the chunk_size of the blob, or 40 MiB.

    :type text_mode: bool
    :param text_mode:
        (Deprecated) A synonym for ignore_flush. For backwards-compatibility,
        if True, sets ignore_flush to True. Use ignore_flush instead. This
        parameter will be removed in a future release.

    :type ignore_flush: bool
    :param ignore_flush:
        Makes flush() do nothing instead of raise an error. flush() without
        closing is not supported by the remote service and therefore calling it
        on this class normally results in io.UnsupportedOperation. However, that
        behavior is incompatible with some consumers and wrappers of file
        objects in Python, such as zipfile.ZipFile or io.TextIOWrapper. Setting
        ignore_flush will cause flush() to successfully do nothing, for
        compatibility with those contexts. The correct way to actually flush
        data to the remote server is to close() (using this object as a context
        manager is recommended).

    :type retry: google.api_core.retry.Retry or google.cloud.storage.retry.ConditionalRetryPolicy
    :param retry:
        (Optional) How to retry the RPC. A None value will disable
        retries. A google.api_core.retry.Retry value will enable retries,
        and the object will define retriable response codes and errors and
        configure backoff and timeout options.

        A google.cloud.storage.retry.ConditionalRetryPolicy value wraps a
        Retry object and activates it only if certain conditions are met.
        This class exists to provide safe defaults for RPC calls that are
        not technically safe to retry normally (due to potential data
        duplication or other side-effects) but become safe to retry if a
        condition such as if_metageneration_match is set.

        See the retry.py source code and docstrings in this package
        (google.cloud.storage.retry) for information on retry types and how
        to configure them.

        Media operations (downloads and uploads) do not support non-default
        predicates in a Retry object. The default will always be used. Other
        configuration changes for Retry objects such as delays and deadlines
        are respected.

    :param upload_kwargs:
        Keyword arguments to pass to the underlying API
        calls. The following arguments are supported:

        - ``if_generation_match``
        - ``if_generation_not_match``
        - ``if_metageneration_match``
        - ``if_metageneration_not_match``
        - ``timeout``
        - ``content_type``
        - ``num_retries``
        - ``predefined_acl``
        - ``checksum``
    """

    def __init__(
        self,
        blob,
        chunk_size=None,
        text_mode=False,
        ignore_flush=False,
        retry=DEFAULT_RETRY_IF_GENERATION_SPECIFIED,
        **upload_kwargs,
    ):
        for kwarg in upload_kwargs:
            if kwarg not in VALID_UPLOAD_KWARGS:
                raise ValueError(
                    f"BlobWriter does not support keyword argument {kwarg}."
                )
        self._blob = blob
        self._buffer = SlidingBuffer()
        self._upload_and_transport = None
        # Resumable uploads require a chunk size of a multiple of 256KiB.
        # self._chunk_size must not be changed after the upload is initiated.
        self._chunk_size = chunk_size or blob.chunk_size or DEFAULT_CHUNK_SIZE
        # text_mode is a deprecated synonym for ignore_flush
        self._ignore_flush = ignore_flush or text_mode
        self._retry = retry
        self._upload_kwargs = upload_kwargs

    @property
    def _chunk_size(self):
        """Get the blob's default chunk size.

        :rtype: int or ``NoneType``
        :returns: The current blob's chunk size, if it is set.
        """
        return self.__chunk_size

    @_chunk_size.setter
    def _chunk_size(self, value):
        """Set the blob's default chunk size.

        :type value: int
        :param value: (Optional) The current blob's chunk size, if it is set.

        :raises: :class:`ValueError` if ``value`` is not ``None`` and is not a
                 multiple of 256 KiB.
        """
        if value is not None and value > 0 and value % CHUNK_SIZE_MULTIPLE != 0:
            raise ValueError(
                "Chunk size must be a multiple of %d." % CHUNK_SIZE_MULTIPLE
            )
        self.__chunk_size = value

    def write(self, b):
        self._checkClosed()  # Raises ValueError if closed.

        pos = self._buffer.write(b)

        # If there is enough content, upload chunks.
        num_chunks = len(self._buffer) // self._chunk_size
        if num_chunks:
            self._upload_chunks_from_buffer(num_chunks)

        return pos

    def _initiate_upload(self):
        # num_retries is only supported for backwards-compatibility reasons.
        num_retries = self._upload_kwargs.pop("num_retries", None)
        retry = self._retry
        content_type = self._upload_kwargs.pop("content_type", None)

        if num_retries is not None:
            warnings.warn(_NUM_RETRIES_MESSAGE, DeprecationWarning, stacklevel=2)
            # num_retries and retry are mutually exclusive. If num_retries is
            # set and retry is exactly the default, then nullify retry for
            # backwards compatibility.
            if retry is DEFAULT_RETRY_IF_GENERATION_SPECIFIED:
                retry = None

        # Handle ConditionalRetryPolicy.
        if isinstance(retry, ConditionalRetryPolicy):
            # Conditional retries are designed for non-media calls, which change
            # arguments into query_params dictionaries. Media operations work
            # differently, so here we make a "fake" query_params to feed to the
            # ConditionalRetryPolicy.
            query_params = {
                "ifGenerationMatch": self._upload_kwargs.get("if_generation_match"),
                "ifMetagenerationMatch": self._upload_kwargs.get(
                    "if_metageneration_match"
                ),
            }
            retry = retry.get_retry_policy_if_conditions_met(query_params=query_params)

        self._upload_and_transport = self._blob._initiate_resumable_upload(
            self._blob.bucket.client,
            self._buffer,
            content_type,
            None,
            num_retries,
            chunk_size=self._chunk_size,
            retry=retry,
            **self._upload_kwargs,
        )

    def _upload_chunks_from_buffer(self, num_chunks):
        """Upload a specified number of chunks."""

        # Initialize the upload if necessary.
        if not self._upload_and_transport:
            self._initiate_upload()

        upload, transport = self._upload_and_transport

        # Attach timeout if specified in the keyword arguments.
        # Otherwise, the default timeout will be used from the media library.
        kwargs = {}
        if "timeout" in self._upload_kwargs:
            kwargs = {"timeout": self._upload_kwargs.get("timeout")}

        # Upload chunks. The SlidingBuffer class will manage seek position.
        for _ in range(num_chunks):
            upload.transmit_next_chunk(transport, **kwargs)

        # Wipe the buffer of chunks uploaded, preserving any remaining data.
        self._buffer.flush()

    def tell(self):
        return self._buffer.tell() + len(self._buffer)

    def flush(self):
        # flush() is not fully supported by the remote service, so raise an
        # error here, unless self._ignore_flush is set.
        if not self._ignore_flush:
            raise io.UnsupportedOperation(
                "Cannot flush without finalizing upload. Use close() instead, "
                "or set ignore_flush=True when constructing this class (see "
                "docstring)."
            )

    def close(self):
        if not self._buffer.closed:
            self._upload_chunks_from_buffer(1)
        self._buffer.close()

    @property
    def closed(self):
        return self._buffer.closed

    def readable(self):
        return False

    def writable(self):
        return True

    def seekable(self):
        return False


class SlidingBuffer(object):
    """A non-rewindable buffer that frees memory of chunks already consumed.

    This class is necessary because `google-resumable-media-python` expects
    `tell()` to work relative to the start of the file, not relative to a place
    in an intermediate buffer. Using this class, we present an external
    interface with consistent seek and tell behavior without having to actually
    store bytes already sent.

    Behavior of this class differs from an ordinary BytesIO buffer. `write()`
    will always append to the end of the file only and not change the seek
    position otherwise. `flush()` will delete all data already read (data to the
    left of the seek position). `tell()` will report the seek position of the
    buffer including all deleted data. Additionally the class implements
    __len__() which will report the size of the actual underlying buffer.

    This class does not attempt to implement the entire Python I/O interface.
    """

    def __init__(self):
        self._buffer = io.BytesIO()
        self._cursor = 0

    def write(self, b):
        """Append to the end of the buffer without changing the position."""
        self._checkClosed()  # Raises ValueError if closed.

        bookmark = self._buffer.tell()
        self._buffer.seek(0, io.SEEK_END)
        pos = self._buffer.write(b)
        self._buffer.seek(bookmark)
        return self._cursor + pos

    def read(self, size=-1):
        """Read and move the cursor."""
        self._checkClosed()  # Raises ValueError if closed.

        data = self._buffer.read(size)
        self._cursor += len(data)
        return data

    def flush(self):
        """Delete already-read data (all data to the left of the position)."""
        self._checkClosed()  # Raises ValueError if closed.

        # BytesIO can't be deleted from the left, so save any leftover, unread
        # data and truncate at 0, then readd leftover data.
        leftover = self._buffer.read()
        self._buffer.seek(0)
        self._buffer.truncate(0)
        self._buffer.write(leftover)
        self._buffer.seek(0)

    def tell(self):
        """Report how many bytes have been read from the buffer in total."""
        return self._cursor

    def seek(self, pos):
        """Seek to a position (backwards only) within the internal buffer.

        This implementation of seek() verifies that the seek destination is
        contained in _buffer. It will raise ValueError if the destination byte
        has already been purged from the buffer.

        The "whence" argument is not supported in this implementation.
        """
        self._checkClosed()  # Raises ValueError if closed.

        buffer_initial_pos = self._buffer.tell()
        difference = pos - self._cursor
        buffer_seek_result = self._buffer.seek(difference, io.SEEK_CUR)
        if (
            not buffer_seek_result - buffer_initial_pos == difference
            or pos > self._cursor
        ):
            # The seek did not arrive at the expected byte because the internal
            # buffer does not (or no longer) contains the byte. Reset and raise.
            self._buffer.seek(buffer_initial_pos)
            raise ValueError("Cannot seek() to that value.")

        self._cursor = pos
        return self._cursor

    def __len__(self):
        """Determine the size of the buffer by seeking to the end."""
        bookmark = self._buffer.tell()
        length = self._buffer.seek(0, io.SEEK_END)
        self._buffer.seek(bookmark)
        return length

    def close(self):
        return self._buffer.close()

    def _checkClosed(self):
        return self._buffer._checkClosed()

    @property
    def closed(self):
        return self._buffer.closed